Minecraft Stonecutter: Easy Steps on How to Make a Stonecutter in Minecraft

One of my favorite things about Minecraft is the fact that it basically comes with no instruction manual. Even if you can get the basics of the game, there are so many layers that you only learn if you experiment a lot or read up on what others have done. It really makes it fun to try new things.

Of course, there is no shortage of information about all the secrets in Minecraft. Considering that the game has over 600 million players globally, there’s no stone left to be unturned in that wondrous world of creativity.

One of the great items in this game that allows you to really customize your world is the Minecraft stonecutter. This is just one of the many tools in this game that allows you to make other objects. It can be used in your designs and constructions for as much accuracy as possible.

Suppose you’re looking to become a self-acclaimed Minecraft expert. In that case, this is just one of the many tools that you should do your best to learn as much as you can, because that information will definitely come in handy!

Well then, let’s get into the perks and info about the stonecutter Minecraft.

Do you have a particular question about creating a Minecraft stonecutter? Then use the table of contents below to jump to the most relevant section. And you can always go back by clicking on the black arrow in the right bottom corner of the page. Also, please note that some of the links in this article may be affiliate links. For more details, check the Disclosure section at the bottom of the page. 

What is a stonecutter in Minecraft?

In older versions of Minecraft, the stonecutter was just a decorative block that didn’t really do anything. But in the newer versions of the game, it is a functional block.

The stonecutter in Minecraft can be used to craft different kinds of blocks made from stones and minerals such as granite, sandstone, andesite, diorite, and more.

There are a lot of reasons why you might want to make use of a stonecutter in Minecraft, so we’ll talk about that in detail in the next section.

ipoki tech blog - ending separator

What does a stonecutter do in Minecraft?

The Minecraft stonecutter can be used to produce all kinds of stone-derived blocks. The stone blocks that it makes can be produced by crafting, but the stonecutter is more efficient in multiple ways.

For instance, a single block of any stone will produce one block of stairs when making stairs. However, if crafting stairs without a stonecutter, you will need to have 1.5 blocks of any stone to make each stair block (6 stones for 4 stairs). Using the stonecutter allows you to make precise quantities of stairs too.

Note that the stonecutter is also awesome because it can help you make some blocks a lot easier than you would by crafting alone. The best example of this is the chiseled stone blocks.

You’ll need three blocks of stone, which you would then use to make two slabs of stone, before putting those together to make a chiseled stone block. Meanwhile, if you’ve made a stonecutter for yourself, all you will need to do is put a single stone block into the stonecutter to get a chiseled stone block back!

Another cool thing about the stonecutter is that it can be used to cut copper out of copper blocks. This isn’t a stone, per se, so I decided to add it separately, especially as it is a relatively new block.

ipoki tech blog - ending separator

Are there many Minecraft stonecutter recipes?

One of my favorite things about the stonecutter is that every single stonecutter recipe requires just a single block of whichever material you’re using with it.

Meanwhile, the blocks that can be used with the stonecutter include the following:

  • Stone (including smooth stone, stone brick, mossy stone brick)
  • Granite (including polished)
  • Diorite (including polished)
  • Andesite (including polished)
  • Cobblestone (including mossy)
  • Sandstone (including smooth and cut)
  • Red sandstone (including smooth and cut)
  • Prismarine (including bricks and dark prismarine)
  • Block of quartz (and smooth quartz)
  • Purpur block
  • Bricks
  • Nether bricks
  • Red nether bricks
  • Basalt
  • End stone (including bricks)
  • Blackstone (including polished)
  • Copper or waxed copper (whether a block, exposed, weathered, or oxidized)

Copper can only be used to make a single cut copper block, or if it was waxed beforehand, then a waxed cut copper block.

Not all of the above stones can make the same set of things, but with most of them, you should be able to make at least a few of the following with the right Minecraft stonecutter recipe:

  • Stairs
  • Slabs
  • Bricks
  • Walls
  • Polished versions
  • Cut versions
  • Chiseled versions
  • Pillars
ipoki tech blog - ending separator

How to make a stonecutter?

Obviously, to take advantage of all these perks of having a stonecutter in Minecraft as part of your arsenal, you’ll need to know how to make one. Without the stonecutter crafting recipe, you’re only learning all of this for fun!

Fortunately, you just need to make a stonecutter once. You can break it down with a pickaxe any time after that to store it and move it around. If you don’t use a pickaxe, it will disappear forever! You’ll have to craft or find another one in these cases.

To craft a stonecutter, you’ll need to have an iron ingot and three blocks of stone. The stone lines the bottom row, and the iron ingot takes up the center space.

It is very important to note that the Java Edition of the game is stricter. You can only use a regular stone to make the stonecutter. Meanwhile, in the Bedrock version, you can use the regular or polished variants of diorite, andesite, or stone blocks.

You can also find stonecutters naturally in the game if you don’t want to bother with the stonecutter crafting recipe. You will have to find a village and go to the stone mason’s house. You’ll find one there, which you can then break and take along with you if you’d like. Otherwise, you can just make use of it there.

ipoki tech blog - ending separator

How to use a stonecutter in Minecraft?

Using a stonecutter in this game is perhaps the easiest aspect of it. Once you find one or have crafted one, simply walk up to it and tap or click on it, the same way you would with a crafting table. This will bring up the menu that you use to make things with it.

Place a block in the top space and choose what you want to produce from the left panel. That’s it! You’ll get your slab or stairs or whatever it is you choose to make. You can also have more than one material block put into the stonecutter.

Credits: Thanks for the photo to Canva.

ipoki tech blog - ending separator

At ipoki.com we only mention the products that we’ve researched and considered worthy. But it’s important to mention that we are a participant of several affiliate programs, including Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a mean for us to earn fees by linking to Amazon.com and affiliated sites. As an Amazon Associate ipoki.com earns from qualifying purchases.